精品文档 你我共享

本文主要向大家介绍了对于华为3com路由器的端口如何进行映射设置，具体进行怎样的操作呢？下面的文章给出了详细配置步骤和命令操作。

本文介绍了华为3com路由器的端口映射的方法，并且给出了详细的操作步骤和命令语句，相信看完此文会对具体配置有详细的了解。

************************************************** ******************************

* Copyright(c) 2004-2006 Hangzhou Huawei-3Com Tech. Co., Ltd. * * Without the owner''''s prior written consent, *

* no decompiling or reverse-engineering shall be allowed. * ************************************************** ******************************

Login authentication Username:admin Password:

dis int <-(预示端口状况) Ethernet1/0 current state :UP Line protocol current state :UP Description : Ethernet1/0 Interface

The Maximum Transmit Unit is 1500, Hold timer is 10(sec) Internet Address is 218.206.191.49 <---(找到公网地址的端口) IP Sending Frames'''' Format is PKTFMT_ETHNT_2, Hardware address is 000f-e24b-90c1

Media type is twisted pair, loopback not set, promiscuous mode not set 100Mb/s, Full-duplex, link type is autonegotiation

Output flow-control is disabled, input flow-control is disabled Output queue : (Urgent queuing : Size/Length/Discards) 0/50/0 Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0

知识改变命运

精品文档 你我共享

Output queue : (FIFO queuing : Size/Length/Discards) 0/75/0 Last clearing of counters: Never

Last 300 seconds input rate 76409.96 bytes/sec, 611279 bits/sec, 221.16 packets/sec

Last 300 seconds output rate 169645.62 bytes/sec, 1357165 bits/sec, 217.84 packets/sec

Input: 84913558 packets, 1899317081 bytes, 84913558 buffers 1556505 broadcasts, 124223 multicasts, 0 pauses 374 errors, 0 runts, 0 giants 0 crc, 0 align errors, 374 overruns 0 dribbles, 0 drops, 0 no buffers

Output:73691649 packets, 1323897889 bytes, 73691649 buffers 19084 broadcasts, 0 multicasts, 0 pauses 0 errors, 0 underruns, 0 collisions 0 deferred, 0 lost carriers sys <--(步入体系视图） [H3C]int e1/0

[H3C]nat server protocol tcp global 218.206.191.49 www inside 192.168.1.96 www [H3C]nat server protocol tcp global 218.206.191.49 22 inside 192.168.1.96 22 [H3C]nat server protocol udp global 218.206.191.49 snmp inside 192.168.1.96 snmp

[H3C]nat server protocol udp global 218.206.191.49 snmptrap inside 192.168.1.96 snmptrap <--(一看就大白tcp/udp是以及谈，www是80,snmp以及snmptrap是161.162端口)

[H3C]dis thellos interface Ethernet1/0

ip address 218.206.191.49 255.255.255.248

知识改变命运

精品文档 你我共享

firewall packet-filter 3000 inbound

nat outbound 3001 <--(这是客户上彀用的地址池不消管，其它的就是端口照射了) nat server protocol tcp global 61.178.77.9 www inside 192.168.1.96 www nat server protocol tcp global 61.178.77.9 22 inside 192.168.1.96 22 nat server protocol udp global 61.178.77.9 snmp inside 192.168.1.96 snmp nat server protocol udp global 61.178.77.9 snmptrap inside 192.168.1.96 snmptrap

思科网络的端口照射原理是同样的号令纷歧样罢了，这搭只给出配备布置。 思科网络>en 思科网络#config t

思科网络(config)Ip nat inside source static tcp 192.168.1.96 80 218.206.191.49 80

思科网络(config)Ip nat inside source static tcp 192.168.1.96 22 218.206.191.49 22

思科网络(config)Ip nat inside source static tcp 192.168.1.96 161 218.206.191.49 161

思科网络(config)Ip nat inside source static tcp 192.168.1.96 162 218.206.191.49 162

沁园春·雪

北国风光， 千里冰封， 万里雪飘。 望长城内外， 惟余莽莽； 大河上下， 顿失滔滔。

知识改变命运