机械毕业设计参考文献

【篇一：机械毕业设计参考文献(大全)】

part1中文

[1] 巩云鹏、田万禄等主编. 机械设计课程设计 . 沈阳：东北大学出版社 2000

[2] 孙志礼，冷兴聚，魏严刚等主编. 机械设计. 沈阳：东北大学出版社 2000

[3] 刘鸿文主编. 材料力学. 北京：高等教育出版社1991

[4] 哈尔滨工业大学理论力学教研组编. 理论力学. 北京：高等教育出版社 1997

[5] 大连理工大学工程画教研室编. 机械制图. 北京：高等教育出版社 1993

[6] 孙 桓，陈作模主编. 机械原理. 北京：高等教育出版社 2000 [7] 高泽远，王 金主编. 机械设计基础课程设计.沈阳：东北工学院出版社 1987

[8] 喻子建，张磊、邵伟平、喻子建主编. 机械设计习题与解题分析.沈阳：东北大学出版 社 2000

[9] 张 玉，刘 平主编. 几何量公差与测量技术 .沈阳：东北大学出版社 1999

[10] 成大先 主编.机械设计手册(减(变)速器.电机与电器)化学工业出版社

part2中文

[1]《煤矿总工程师工作指南》编委会编著. 《矿总工程师工作指南》（上）. 北京：煤炭工业出版社，1990.7

[2] 严万生等编著.《矿山固定机械手册》..北京：煤炭工业出版社，1986.5，第1版

[3]孙玉蓉等编著.《矿井提升设备》. 北京：煤炭工业出版社，1995.1，第1版

[4] 中国矿业学院主编. 《矿井提升设备》. 北京：煤炭工业出版社，1980.9，第1版

[5] 煤炭工业部制定.《煤矿安全规程》.煤炭工业出版社，1986，第1版

[6] 谢锡纯，李晓豁主编.《矿山机械与设备》.徐州：中国矿业大学出版社，2000

[7] 能源部制定.《煤矿安全规程》.北京：煤炭工业出版社，1992

[8] 王志勇等编.《煤矿专用设备设计计算》.北京：煤炭工业出版社，1984

[9] 彭兆行编.《矿山提升机械设计》.北京：机械工业出版社，1989 [10] 机械设计、机械设计基础课程设计，王昆等主编，北京：高等教育出版社，1996

[11] 机械设计手册/上册，《机械设计手册》联合编写组编，化学工业出版社，1979

[12] 画法几何及工程制图，中国纺织大学工程图学教研室等编，上海科学技术出版社，1984

[13] 机械零件设计手册(第二版)/中册，东北工学院《机械零件设计手册》编写组编，冶金工业出版社，1982

[14] 机械零件课程设计，郭奇亮等主编，贵州人民出版社，1982.1 [15] 机械设计标准应用手册/第二卷，汪恺主编，北京：机械工业出版社， 1997.8

[16] 矿山提升机械设计，潘英编，徐州：中国矿业大学出版社，2000.12

[17] 机械设计(第七版)，濮良贵、纪名刚主编，北京：高等教育出版社， 2001

[18] 极限配合与测量技术基础，孔庆华、刘传绍主编，上海：同济大学出版社，2002.2 part3英文

1、‘‘how can a bill of materials be de?ned so that all possible products can be built ef?ciently?’’ one way to answer it is to de?ne a set of components (called

modules), each of which contains a set of primary functions. an individual product is then built by combining selected modules.

【1】 bruno agard,bernard penz. a simulated annealing method based on a clustering approach to determine bills of materials for a large product family. int. j. production economics 117 (2009) 389–401.

2、in this study, we propose a methodology for building a semantically annotated multi-faceted ontology for product family modelling that is able to automatically suggest

semantically-related annotations based on the design and manufacturing repository.

【2】 soon chong johnson lim,ying liu,wing bun lee.a methodology for building a semantically annotated multi-faceted ontology for product family modelling. advanced engineering informatics 25 (2011) 147–161.

3、the aim of this work is to establish a methodology for an effective working of recon?gurable manufacturing systems (rmss). these systems are the next step in manufacturing, allowing the production of any quantity of highly customised and complex products together with the bene?ts of mass production.

【3】 r.galan,j.racero,i.eguia,j.m.garcia. a systematic approach for product families formation in recon?gurable manufacturing systems.robotics and computer-integrated manufacturing 23 (2007) 489–502.

4、a mixed integer linear programming model is investigated that optimizes the operating cost of the resulting supply chain while choosing the product variants and can de?ne the product family and its supply chain simultaneously.

【4】 jacques lamothe,khaled hadj-hamou,michel aldanondo. an optimization model for selecting a product family and designing its supply chain. european journal of operational research 169 (2006) 1030–1047.

5、this paper presents lcp-families, a concept to develop

reference ranges for environmental impact of a new product. a new product can be catalogued as

environmentally better or worse than a percentage of its

competitors, depending on what position it occupies in its lcp-family.

【5】 daniel collado-ruiz,hesamedin ostad-ahmad-ghorabi. comparing lca results out of competing products: developing reference ranges from a product family approach. journal of cleaner production 18 (2010) 355–364.

6、this paper has proposed a cooperative coevolutionary optimization method for optimal design of product family with multi–level commonality .

【6】 l.schulze,l.li. cooperative coevolutionary optimization method for product family design.