Operand Definitions
ZEMAX supports optimization operands which are used to define the merit function. Each operand may be assigned a weight which indicates the relative importance of that operand, as well as a target, which is the desired value for that operand. The operands are listed below.
ABSO: Absolute value 绝对值
ACOS: Arccosine
AMAG: Angular magnification 角放大率
ANAR: Angular aberration
ASIN: Arcsine
ASTI: Astigmatism 初级像散
ATAN: Arctangent
AXCL: Axial color
BLNK: Blank
BSER: Boresight Error
COGT: Conic greater than
COLT: Conic less than
COMA: Coma 初级彗差
CONF: Configuration #
CONS: Constant 常量
COSI: Cosine
COVA: Conic value
CTGT: Center thickness greater than 中心厚度(间隔)大于
CTLT: Center thickness less than 中心厚度(间隔)小于
CTVA: Center thickness value 中心厚度(间隔)等于
CVGT: Curvature greater than 曲率大于
CVLT: Curvature less than 曲率小于
CVOL: Cylinder volume
CVVA: Curvature value 曲率等于
DENC: Diffraction encircled energy
DENF: Diffraction encircled energy fraction
DIFF: Difference
DIMX: Distortion max 最大畸变
DISC: Distortion calibrated
DISG: Generalized distortion
DIST: Distortion 畸变
DIVI: Division
DLTN: Delta N
DMFS: Default merit function start 默认评价函数起始点
DMGT: Diameter greater than 直径大于
DMLT: Diameter less than 直径小于
DMVA: Diameter value 直径值
DXDX: Derivative Dx/Dx
DXDY: Derivative Dx/Dy
DYDX: Derivative Dy/Dx
DYDY: Derivative Dy/Dy
EFFL: Effective focal length 有效焦距
EFLX: Effective focal length x x方向焦距
EFLY: Effective focal length y y方向焦距
ENDX: End execution
ENPP: Entrance pupil position 入瞳位置
EPDI: Entrance pupil diameter 入瞳直径
EQUA: Equal
ETGT: Edge thickness greater than 边缘厚度大于
ETLT: Edge thickness less than 边缘厚度小于
ETVA: Edge thickness value 边缘厚度等于
EXPP: Exit pupil position 出瞳位置
FCGS: Field curvature, generalized, sagittal
FCGT: Field curvature, generalized, tangential
FCUR: Field curvature 场曲
FICL: Fiber coupling efficiency
FOUC: Foucault analysis
GBW0: Gaussian beam waist 0
GBWA: Gaussian beam size
GBWD: Gaussian beam divergence
GBWZ: Gaussian beam z position
GBWR: Gaussian beam phase radius
GCOS: Glass relative cost