EPON系统ONU互通配置指导手册
OLT state admin phy mac ONU transceiver self-diag Hardware Firmware id state state addr num type state version version ------------------------------------------------------------------------------------------------------------
2/1 Disabled Enabled present 00:e0:8e:88:02:00 0 EPM04B-SFP passed 0x20 N/A
第5步：
在第2板上的第1口pon口上手动注册ONU并激活，需要知道ONU的mac可以从第2步的告警中获取；
BBS4000(config-t)# interface epon-olt 2/1 BBS4000(config-t-if-olt-2/1)# BBS4000(config-t-if-olt-2/1)# onu 1
BBS4000(config-if-onu-2/1/1)# dba-sla mac 00:0e:5e:04:8d:13 手动ONU,mac地址为00:0e:5e:04:8d:13
BBS4000(config-if-onu-2/1/1)# no shutdown BBS4000(config-if-onu-2/1/1)#exit BBS4000(config-t-if-olt-2/1)# ex
BBS4000(config-t)# show interface epon-olt 2/1 brief
OLT state admin phy mac ONU transceiver self-diag Hardware Firmware id state state addr num type state version version ------------------------------------------------------------------------------------------------------------
2/1 Running Enabled present 00:e0:8e:88:02:00 1 EPM04B-SFP passed 0x20 0x30200
此时ONU的pon口灯闪烁一会后会长亮，表示注册成功，OLT的pon灯变绿且长亮；
第6步：
查看在第2板上的第1口pon口上注册的ONU信息；
BBS4000(config-t-if-olt-2/1)# show interface epon-olt 2/1 onu-registered -------------------------------------------------------------------------
OLT = 2/1, Logical port = 1, ONU id=0, LLID[0]=0 Internal state = Running, admin state = Enabled
Registered state = Registered, authentication state = authorized ONU mac address = 00:0e:5e:04:8d:13 User ID = RTT TQ = 69 Laser_on_time = 4 Laser_off_time = 4
Hardware type = Unknown Hardware version = 0
PON firmware version = 01.254.04 Bootloader version = 01.254.04
第7步：
第 31 页 共 42 页
31
EPON系统ONU互通配置指导手册
查看ONU的带宽分配，具体的配置可以参考BBS1000的命令行手册；
BBS4000(config-t-if-olt-2/1)# show in epon-olt 2/1 onu 1 dba-sla
OLT LPort PIR CIR FIR max pri policing mac calling (Kbps) (Kbps) (Kbps) burst limit station-id ---------------------------------------------------------------------------------------------
2/1 1 100000 512 0 100 1 disable 0 00:0e:5e:04:8d:13
BBS4000(config-t-if-olt-2/1)# ex BBS4000(config-t)#
第8步：
查询olt侧的vlan配置；
BBS4000(config-t)# show vlan
VID Name Ports Tag ports --------+---------------+-----------------------------------------------+------------------
1 Default VLAN {ge1/1-4,ge2/1-4,ge3/1-4,ge4/1-4,ge5/1-4,ge6/1-4,ge7/1-4,ge8/1-4,ge9/1-4,ge10/1-4,ge11/1-4,ge12/1-4} 106 GEPON-Manage ge1/1-2,ge3/1 ge1/1-2,ge3/1 291 switch-Manage ge1/2,ge3/1 ge1/2,ge3/1 766 voip ge1/3,ge3/1 ge1/3,ge3/1 1179 ge1/3,ge3/1 ge3/1 1180 ge1/2,ge3/1 ge3/1 1181 ge1/1,ge3/1 ge3/1 3972 ZhuanXian ge1/1-2,ge3/1 ge1/1-2,ge3/1
BBS4000(config-t)#
解析：vid 1为默认vlan，ge 3/1为olt的上联口，
BBS4000(config-t)# BBS4000(config-t)# show version
BBS4000 software release version: BBS4000_02.01.00.016 Bootrom version : 01.00.00.006
Cortina version: iROS SC Release 03.02.007 Cortina version: iROS OLT Release 03.02.007
Broadcom chip version: BCM56502_B2 Broadcom revision number: 0x13 Broadcom SDK version: sdk5.2.3
第9步：
将板2pon口1加入到vlan 3972，为tag模式；
BBS4000(config-t)# vlan 3972
第 32 页 共 42 页
32
EPON系统ONU互通配置指导手册
BBS4000(config-t-vlan-3972)# member ge2/1 tagged BBS4000(config-t-vlan-3972)#
BBS4000(config-t-vlan-3972)# show vlan 3972
VLAN ID :3972
Name :ZhuanXian port(s) or group(s) :ge1/1-2,ge2/1,ge3/1 Tagged port(s) or group(s) :ge1/1-2,ge2/1,ge3/1 Untagged port(s) or group(s) :
第10步：
配置ONU的端口为vlan tag模式；
BBS4000(config-t-vlan-3972)# ex
BBS4000(config-t)# interface epon-olt 2/1 BBS4000(config-t-if-olt-2/1)# onu 1
BBS4000(config-if-onu-2/1/1)# remote-mgmt eth 1 vlan-mode tag 3972 8100
配置tag模式vlan 3972 type 8100
Error: Set olt 5 onu 1 VlanPassSet disable failed （虽然返回error，但是配置是成功，并且生效的，可以忽略error）
BBS4000(config-if-onu-2/1/1)# BBS4000(config-if-onu-2/1/1)#
BBS4000(config-if-onu-2/1/1)# show configuration running BBS4000(config-t-if-olt-2/1)# exit
BBS4000(config-t)# interface epon-olt 2/1 BBS4000(config-t-if-olt-2/1)#
BBS4000(config-t-if-olt-2/1)# show interface epon-olt 2/1 onu-registered -------------------------------------------------------------------------
OLT = 2/1, Logical port = 1, ONU id=0, LLID[0]=0 Internal state = Running, admin state = Enabled
Registered state = Registered, authentication state = authorized ONU mac address = 00:0e:5e:04:8d:13 User ID = RTT TQ = 69 Laser_on_time = 4 Laser_off_time = 4
Hardware type = Unknown Hardware version = 0
PON firmware version = 01.254.04 Bootloader version = 01.254.04
第 33 页 共 42 页
33
BBS4000(config-t-if-olt-2/1)#
EPON系统ONU互通配置指导手册
4.4 BBS4000/1000+相关命令及解析 BBS4000/1000+ONU相关配置命令
BBS4000/1000+OLT相关配置命令
第 34 页 共 42 页 34
EPON系统ONU互通配置指导手册
4.4.1 PON 全局配置
PON System
Access Level: 2
This command is to assign PON system global parameter under configuration terminal command mode (BBS1000(config-t)#).
Help Description: To configure PON global parameters
local-authentication
Syntax: pon-sys local-authentication
enable: Enable local SLA authentication disable: Disable local SLA authentication
Help Description: Enable or disable local SLA authentication.
lport-strict-binding
Syntax: pon-sys lport-strict-binding
enable: Enable local logical port strict binding disable: Disable local logical port strict binding
Help Description: Enable or disable local logical port strict binding.
mac-addr-aging-time
Syntax: pon-sys mac-addr-aging-time
第 35 页 共 42 页 35