瑞斯康达ONU设备互通配置指导手册(20090531)

EPON系统ONU互通配置指导手册

re-authentication

Syntax: re-authentication interval {access-reject | timeout }

Possible Values:

: <1..15360>seconds, default: 60 (sec) : <1..15360> seconds, default 5(sec)

Access Level: 2

Help Description: Configure ONU re-authentication parameters.

reset

This command is reset onu.

Syntax: reset Possible Values: N/A Default value: N/A

Access Level: 2

Help Description: To reset onu

4.4.4 show命令

show interface epon-olt onu dba-sla

This command is to show ONU SLA information.

Syntax: show interface epon-olt [module/port] onu [logical-port] dba-sla

Possible Values:

?{1..2}/{1..4}, ASCII string up to 32 characters for single interface

: ONU ID 1 - 32 Access Level: 0

show interface epon-olt onu-registered

This command is to show all registered ONU.

Syntax: show interface epon-olt [module/port] onu-registered

Possible Values:

?{1..2}/{1..4}, ASCII string up to 32 characters for single interface

Access Level: 0

Help Description: To show all registered ONU of all OLT interfaces or specific OLT interface.

show interface epon-olt brief

This command is to display OLT interfaces or specific interface brief state information.

Syntax: show interface epon-olt [module/port] brief

第 41 页 共 42 页 41

Access Level: 0

EPON系统ONU互通配置指导手册

Help Description: To show OLT interfaces ans specific interface brief information.

Example1:

BBS1000+# show interface epon-olt brief

Example 1:

BBS1000+(config-t-if-ge-1/1)# show interface epon-olt brief

show interface epon-olt onu downstream-bandwidth

This command is to show downstream SLA.

Syntax: show interface epon-olt [module/port] onu [logical-port] downstream- bandwidth

Possible Values: ?{1..2}/{1..4}, ASCII string up to 32 characters for single interface [logical-port]: ONU ID 1 to 32. Access Level: 0

Help Description: To show downstream SLA configuration.

show configuration

This command is to show currently start-up/running/active configuration information. Note: The displayed information includes any latest change user made/configure to the product.

Syntax: show configuration [start-up] [running] [active]

Possible Values:

start-up: - Show start up configuration running: - Show running configuration active: - Show RADIUS active configuration

Access Level: 0

Help Description: show system currently start-up/running/active configuration information.

Example:

BBS1000+# show configuration

第 42 页 共 42 页 42