理工类毕业设计（论文）模版 （此行字体打印时删除） 毕业设计（论文）
龙门数控火焰切割机设计
学院（系）燕山大学里仁学院 年级专业 05机制2班 学生姓名
指导教师 答辩日期 错误！未找到引用源。
全套CAD图纸，加153893706
燕山大学本科生毕业设计（论文）
摘 要
本课题所设计的数控火焰切割机是一种中型切割设备，它可以很方便的对金属材料进行直线或曲线切割，可广泛应用于机械、建筑、化工、航天等行业。
首先，本文通过对火焰切割技术及数控火焰切割机的国内外研究现状的分析，对火焰切割机的总体结构进行了设计，整体采用龙门式结构，纵向、横向和垂直三个方向进给运动均选用电动机带动滚珠丝杠传动的开环控制系统。其次，由于火焰切割机切割工件时无切削力，所以纵向进给运动采用电机直接驱动来完成。最后，为了加工制造的方便还绘制了切割机的所有零部件和装配体的工程图。
关键词 数控火焰切割机，龙门式，结构设计
I
燕山大学本科生毕业设计（论文）
Abstract
The CNC flame cutter designed in this topic is intermediate cutting equipment. It can easily cut metal materials with linear or curvilinear drawings and can be widely used in machining, architecture, chemical industry, spaceflight and other industry.
Firstly, through the analysis of research actuality about the flame cutting technology and the CNC flame cutting machine at home and abroad the whole structure of the flame cutter is designed in this article. The whole structure uses the gantry structure, the open-loop control systems, using stepping motor to drive ball screws, were chosen at longitudinal, horizontal and vertical directions. Secondly, Since there is no cutting power when the flame cutter cuts work-piece, therefore, the vertical movement is provided by the movement of worktable driven directly by stepping motor. In the end, all the drawings of parts and assembly are protracted in order to facilitate the manufacture.
Keywords Numerical control flame cutter, gantry type, Structural design
II