Generative Shape Detailed Steps
COPYRIGHT DASSAULT SYSTEMES 2002 CATIA Training
esign
Version 5 Release 10 December 2002
EDU-CAT-E-GSD-FS-V5R10
DGenerative Shape Design Detailed Steps
Table of Contents
Mobile Phone ................................................................................................................. 3 Step 1: Creating the Wireframe Geometry ............................................................... 3 Step 2: Creating the Surfaces ................................................................................... 8 Step 3: Performing operations ................................................................................ 15 Step 4: Analyzing and Modifying ............................................................................ 25 Step 5: Completing the part in Part Design ........................................................... 33
COPYRIGHT DASSAULT SYSTEMES 2002 2
Generative Shape Design Detailed Steps
Mobile Phone
Step 1: Creating the Wireframe Geometry
Load the part called CATGSD_F_Phone_Step1_start.CATPartfrom the ''Companion'' and save the part in the Students directory.
1. You are going to extract the elements that will be necessary to complete the wireframe geometry:
? Double-click on the Extract icon
? Select the elements to be extracted (two pink edges and the yellow face) :
? Click Cancel to close the Extract dialog box.
2. You are going to use these extracted elements to create the wireframe geometry:
? Click on the Parallel Curve icon .
?
Select the shortest pink extracted curve as element to offset, and the yellow face as support:
?
Click OK to confirm.
COPYRIGHT DASSAULT SYSTEMES 2002 3