36
参考资料
[1] ERNST, T., POPP, R., WOLF, M., VAN ELDIK, R., Analysis of eco-relevant elements and noble metals in printed wiring boards using AAS, ICP-OES and EDXRF, Anal.Bioanal. Chem., 2003, 375:p.805-814
[2] IEC 62321-7-2, Determination of certain substances in electrotechnical products – Part7-2: Hexavalent chromium (Cr(VI)) in polymers and electronics by the colorimetricmethod
其它非引用的参考资料
EN 1122, Plastics – Determination of cadmium – Wet decomposition method
EN 13346, Characterization of sludges – Determination of trace elements and phosphorus –Aqua regia extraction methods
EDGELL, K., US EPA Method Study 37 – SW-846 Method 3050 Acid Digestion of Sediments,Sludges, and Soils. EPA Contract No. 68-03-3254, November 1988
United States Environmental Protection Agency (EPA), EPA SW-846 Method 3052,Microwave-assisted acid digestion of siliceous and organically based matrices
United States Environmental Protection Agency (EPA), EPA SW-846 Method 6010B, Inductively coupled plasma-atomic emission spectrometry
United States Environmental Protection Agency (EPA), EPA SW-846 Method 7000, Series measurement methods for lead, cadmium, chromium and mercury
RITTER, A. MICHEL, E. SCHMID, M. AFFOLTER, S., Interlaboratory test on polymers: determination of heavy metals in polymer matrices, Polymer testing 23 (2004), 467-474
ASTM D 4004-93, Standard test methods for rubber determination of metal content by flameatomic absorption (AAS) analysis
ASTM D 3335-85A, Standard test method of low concentration of lead, cadmium and cobalt inpaint by atomic absorption spectroscopy
ASTM D 1224-92, Standard test methods for zinc and cadmium in paper
ASTM D 3624-85A, Standard test method for low concentration of mercury in paint by atomicabsorption spectroscopy
36
37
ASTM C 146-94A, Standard test methods for chemical analysis of glass sand
ASTM C 169-92, Standard test methods for chemical analysis of soda-lime and borosilicateglass
EN 10181, Chemical analysis of ferrous materials determination of lead in steels flame atomicabsorption spectrometric method
ASTM E 350-95, Standard test methods for chemical analysis of carbon steel, low-alloy steel,silicon electrical steel, ingot iron, and wrought iron
ASTM E 353-93, Standard test methods for chemical analysis of stainless, heat resisting, maraging, and other similar chromium-nickel-iron alloys
ASTM E 363-93, Standard methods for chemical analysis of chromium and ferrochromium
ASTM E 361-99, Standard test methods for the determination of arsenic and lead in ferromanganese
ASTM E 362-99, Standard test methods for the determination of arsenic and lead in silicomanganese and ferrosilicon manganese
ASTM E 34-94, Standard test methods for chemical analysis of aluminum and aluminum-basealloys
ASTM E 478-03, Standard test methods for chemical analysis of copper alloys
ASTM E 1834-96, Standard test method for determination of lead in nickel alloys by electrothermal atomic absorption spectrometric method
ASTM E 536, Standard test methods for chemical analysis of zinc and zic alloys
EN 12441-3, Zinc and zinc alloys – Chemical analysis – Part 3: Determination of lead, cadmium and copper – Flame atomic absorption spectrometric method
United States Environmental Protection Agency (EPA), EPA SW-846 Chapter 1--Quality Control, Revision 1: July 1992
_____________
37