InsydeH20 setup utility Rev.3.5 InsydeH20 的安装实用程序 Rev.3.5
[main] 主要
System time 系统时间；Help:
语言帮助： 选择语言
[security] 安全
User password 用户密码；
Help: Set delete or change the user password 帮助: 设置删除或更改用户密码 Supervisor password 监督人密码
Help: Set delete or change the supervisor password 帮助: 设置删除或更改监护人密码
HDD1/SSD1 password startus not registered ； HDD1/SSD1 密码 startus 未注册
HDD1/SSD1 password mode [User only][user + master] ；HDD1/SSD1 密码模式 [用户仅] [用户 + 主] Help: Select the HDD1/SSD1 password mode；帮助: 选择 HDD1/SSD1 的密码模式 User HDD1/SSD1 password [enter] ；HDD1/SSD1 的用户密码 [进入]
Help: Set delete or change the user HDD1/SSD1 password；帮助: 设置删除或更改用户 HDD1/SSD1 密码
[power management]
Wake-up on LAN
[权限 管理]
[Disabled][Enabled] ； 在局域网唤醒 [禁用] [启用]
Help: Let the computer’s power be turned a wake-up signal from the LAN 帮助： 让计算机的电源打开从 LAN 唤醒信号
Wake on keyboard [Disabled][Enabled] ； 唤醒键盘 [禁用] [启用] Help: Let the computer’s power on by pressing any key, then PC is in sleep 帮助： 让计算机的电源任何按键然后 PC 处于睡眠状态 Critical Battery Wake-up
[Disabled][Enabled]；关键电池唤醒 [禁用] [启用]
Help: Resume from standby automatically when Battery capacity become critical level. 帮助：电池容量成为关键级别时自动恢复从待机状态。 Dynamic CPU Frequency Mode[Dynamic Switch] [Always Low]
动态 CPU 频率模式 [动态开关] [始终低]
Help: Configure the power saving modes associated with the processor. [Dynamic Switch] The processor’s power consumption and automatic clock speed switching functions are enabled. [Always Low] The
processor will always run at a lower level of power consumption and a low speed. 帮助: 配置节能模式与处理器相关联。 [动态开关] 启用处理器的功耗和自动时钟速度切换功能。 [总是低] 该处理器将始终运行在较低级别的功耗和较低的速度。 Core Multi-Processing [Enabled] ；核心 Multi-Processing [启用] Help: Enable processor cores；帮助： 启用处理器核心
eSATA [Enabled]；eSATA [启用]
Help: Let the e-SATA port disabled in order to save power.；帮助： 让 e SATA 端口禁用，以节省电源。 SATA Interface Setting
[Performance] [Battery life] SATA 接口设置 [性能] [电池寿命]
Help: [Performance] Let HDD/SSD work with maximum performance, [Battery life] Let HDD/SSD work with battery life mode. If this setting is selected this causes performance down. 帮助： [性能] 让硬盘/SSD 工作最大的性能 [电池寿命] 让硬盘/SSD
[Advanced] 高级设置
Boot Speed
[Normal] [Fast] 启动速度 [正常] [快]
Help: [Fest] A setting to reduce the time BIOS needs to initialize. Sets the BIOS to boot. Only from a built-in HDD/SSD. Support only the internal LCD and keyboard, and not display the boot logo. There are no restrictions when using windows.
[Normal] Sets the BIOS to normal boot.
帮助： [测试] A 减少时间 BIOS 设置需要初始化。 设置启动 BIOS。 只能从一个内置硬盘/SSD。 支持仅内部液晶显示器和键盘，并不显示启动徽标。 使用窗口时，没有任何限制。 [正常] 将 BIOS 设置为正常启动。