1.冲压技术条件按JB4380执行 2.未注尺寸公差按ZBT04006.3执行 3.去毛刺、锐边
4.详细形状见3D数据
5.焊接质量符合标准GB/T19867 NOTE
1.The stamping technology according to JB4380. 2.Unmarked tolerances according to ZBT04006.3. 3.No burrs,blunt-edged.
4.Find more details about shapes in 3D datas. 5.Weld quality：GB/T19867.
1.冲压技术条件按JB4380执行 2.未注尺寸公差按ZBT04006.3执行 3.去毛刺、锐边
4.详细形状见3D数据 NOTE
1.The stamping technology according to JB4380. 2.Unmarked tolerances according to ZBT04006.3. 3.No burrs,blunt-edged.
4.Find more details about shapes in 3D datas.
技术要求
1.冲压技术条件按JB4380执行 2.未注尺寸公差按ZBT04006.3执行 3.去毛刺、飞边。 4.详细形状见3D数据 NOTE
1.The stamping technology conditions according to JB4380
2.Did not note the dimensional tolerances according to ZBT04006.3 3.No burr or flanging.
4.Shown on 3D date in detail.
1.冲压技术条件按JB4380执行 2.未注尺寸公差按ZBT04006.3执行 3.去毛刺、锐边
4.详细形状见3D数据
5.焊接质量符合标准GB/T19867 NOTE
1.The stamping technology conditions according to JB4380.
2.Did not note the dimensional tolerances according to ZBT04006.3. 3.No burr or flanging.
4.Shown on 3D date in detail 5.Weld quality：GB/T19867.
1.The stamping technology conditions according to JB4380.
2.Did not note the dimensional tolerances according to ZBT04006.3. 3.No burr or flanging.
4.Shown on 3D date in detail 5.Weld quality：GB/T19867
技术要求
1.一般公差符合 GB/T 13914。 2.表面无起皱、划痕、擦伤等等。 NOTE
1.General tolerances in accordance with GB/T 13914. 2.No wrinkling, no scratch of the surface.
1.一般公差符合 GB/T 13914。 2.表面无起皱、划痕、擦伤等。 3.详细形状见3D数据。 NOTE
1.General tolerances applies the GB/T 13914. 2.No wrinkling, no scratch of the surface. 3.Shown on 3D date in detail.
技术要求
1.一般公差符合 GB/T 13914。 2.表面无起皱、划痕、擦伤等。 3.详细形状见3D数据。
4.焊接质量符合标准：GB/T19867。 NOTE
1.General tolerances applies the GB/T 13914. 2.No wrinkling, no scratch of the surface. 3.Shown on 3D date in detail. 4.Weld quality：GB/T 19867.