regulations and other requirements. 4.4 laws, regulations and other requirements of issuance, implementation, inspection and conformity assessment. 4.4.1 production technology section promptly of any applicable laws, regulations and other requirements, the important contents in the excerpts, and distributed to the relevant departments and units. 4.4.2 units should be organized to study law, regulations, standards and other requirements and run in strict compliance with safety standardization, unit training records in various departments safety meeting records, team records in the team event records. 4.4.3 biotech section once a year to carry out safety laws and regulations to supervise and inspect, for failure to comply with laws, regulations and other requirements to organize relevant departments to analyze the causes of the phenomenon, for rectification. Production technology section is responsible for establishing laws, regulations and other requirements conformity assessment records. 4.5 rules and safety procedures 4.5.1 bio section is responsible for the preparation of the company's safety rules and regulations, and distributed to all staff of the Organization of the workshop and strictly enforced. 4.5.2 the workshops should be developed based on the characteristics suitable for the unit's safety regulations or group safety regulations implementing regulations, issued to the workshop and team, should be strictly enforced at all levels. 4.5.3 workshop should be based on the processes, technologies, equipment characteristic products and raw materials, auxiliary materials, preparation of the risk position for safe operation, sent to the workshop and team, personnel should operate in accordance with the safety rules. 4.6 review and revision 4.6.1 production technology section Office organized relevant departments units once a year to review the documentation issued by, not suitable documents be revised in a timely manner. 4.6.2 processes, technology, material changes on or after an accident, and biotech branch and that the workshop should be timely to various regulations and safety rules be revised to ensure suitability and effectiveness. 4.6.3 revision of the file change approval form should be filled in, indicating the causes and changes, approved by the Deputy in charge of security, General Manager of revision. 4.6.4 a new revised safety regulations and safety rules should be released to the post in a timely manner to ensure rules and safety regulations of each post is the latest file, recover the original document unified void. 5. related records 5.1 list of applicable laws, regulations and standards of the inventory listing number carbon industry laws and regulations legal regulations and other requirements came into force date enacted sector update record 1/standard number People's Republic of China 2, Chairman of the national people's Congress made the 70th production safety law 2002.11.1 People's Republic of China Law of occupational disease prevention 2002.05.01 NPC 3, order of the President of the 60th People'sregulations and other requirements. 4.4 laws, regulations and other requirements of issuance, implementation, inspection and conformity assessment. 4.4.1 production technology section promptly of any applicable laws, regulations and other requirements, the important contents in the excerpts, and distributed to the relevant departments and units. 4.4.2 units should be organized to study law, regulations, standards and other requirements and run in strict compliance with safety standardization, unit training records in various departments safety meeting records, team records in the team event records. 4.4.3 biotech section once a year to carry out safety laws and regulations to supervise and inspect, for failure to comply with laws, regulations and other requirements to organize relevant departments to analyze the causes of the phenomenon, for rectification. Production technology section is responsible for establishing laws, regulations and other requirements conformity assessment records. 4.5 rules and safety procedures 4.5.1 bio section is responsible for the preparation of the company's safety rules and regulations, and distributed to all staff of the Organization of the workshop and strictly enforced. 4.5.2 the workshops should be developed based on the characteristics suitable for the unit's safety regulations or group safety regulations implementing regulations, issued to the workshop and team, should be strictly enforced at all levels. 4.5.3 workshop should be based on the processes, technologies, equipment characteristic products and raw materials, auxiliary materials, preparation of the risk position for safe operation, sent to the workshop and team, personnel should operate in accordance with the safety rules. 4.6 review and revision 4.6.1 production technology section Office organized relevant departments units once a year to review the documentation issued by, not suitable documents be revised in a timely manner. 4.6.2 processes, technology, material changes on or after an accident, and biotech branch and that the workshop should be timely to various regulations and safety rules be revised to ensure suitability and effectiveness. 4.6.3 revision of the file change approval form should be filled in, indicating the causes and changes, approved by the Deputy in charge of security, General Manager of revision. 4.6.4 a new revised safety regulations and safety rules should be released to the post in a timely manner to ensure rules and safety regulations of each post is the latest file, recover the original document unified void. 5. related records 5.1 list of applicable laws, regulations and standards of the inventory listing number carbon industry laws and regulations legal regulations and other requirements came into force date enacted sector update record 1/standard number People's Republic of China 2, Chairman of the national people's Congress made the 70th production safety law 2002.11.1 People's Republic of China Law ofoccupational disease prevention 2002.05.01 NPC 3, order of the President of the 60th People'sThis Conference is by municipal Standing Committee research decided held of, main task is in-depth learning implement XI General Secretary on \n a do\ducation of important indicates spirit and provincial Secretary XXX important speech spirit, according to central deployment and provincial requirements, on I city \ng education work for arrangements deployment, education guide General members further firm ideal faith, and keep on party loyalty, and set breeze upright, and courage to play as, for in province first full built well-off social, and Building higher levels of ecological vitality city provide a strong organizational guarantee of happiness. All party members in the \on Party rules, series of speeches, be qualified party members\ducation, Party Central Committee to deepen the inner-party education, advancing the comprehensive yet another important practice in strictly administering the party, is to promote the inner-party education from \nded, from the concentration of important measures to extend education to regular education, is leading the task of party building this year. This year, the XI General Secretary on many occasions \ducation issued instructions, profoundly illustrates the significance of education, brilliantly describes the overall objectives, basic requirements and main tasks of education, made clear that the main responsibility of the head of the party organization at all levels and shall carry outpoint in the right direction for the us to carry out study and education, provide the fundamental follow. On April 6, Liu Yunshan, Comrade Zhao Leji in Central %um on educational work, a careful deployment of this work, put forward a clear requirement. On April 13, the Party Secretary, Xie Fuzhan, Director of the provincial people's Congress, the province's \study educational Conference, made specific arrangements to carry out study and education in the province. We want to seriously study led And further implementation. Party according to the spirit of the Central and provincial requirements, based on actual city, research has developed a \o\onal programmes and study contents specific programmes, we want to pay special attention to follow-up. Now, I make a few remarks. First, deepening understanding, enhancing grasp \onal responsibility since the party's 18, Comrade XI Jinping as General Secretary of the CPC Central Committee made a series of major deployment around the party's construction, making a series of punch, construction of a new political styles and the aspirations of the Party greatly condensed. \nd education, reflects the interlocking, step by step, further promote the comprehensive strictly administering the party's firm determination and political will, to push forward the \e\strategy is of great significance. We should be supported by political and overall中 国 民 用 航 空 总 局
标题：
咨询通告
编 号：AC-66R1-02
颁发日期：2006年07月17日 批 准 人：蒋怀宇
民用航空器维修人员执照基础部分考试大纲
1.目的和依据
本咨询通告依据民用航空规章《民用航空器维修人员执照管理规则》（CCAR-66R1）第66.10条制定。目的是为民用航空器维修人员执照（以下简称维修人员执照）基础部分的考试提供标准。 2.适用范围
本咨询通告适用于欲取得维修人员执照基础部分的人员，同时适用于民用航空器维修人员执照考试管理中心（以下简称考管中心）。 3.撤销
本咨询通告完全生效日期起撤销原AC-66-03中的民用航空器维修人员执照考试大纲内容。 4.生效日期
本咨询通告中基本技能考试大纲于本通告下发之日起生效，本通告完全生效日期为 2007年2月1日。 5．考试大纲说明
5.1笔试考试大纲（附件一）说明 5.1.1定义
模块式考试:模块式考试是指将考试内容按照科目(模块)划分,分科目(模块)进行考试,各科(模块)成绩均合格后方说明其笔试成绩合格。
新增专业：是指已持有CCAR-66R1部第66.7条规定的民用航空器维修人员执照基础部分某一专业的人员申请增加专业。
新增类别：是指持有CCAR-66R1部第66.7条规定的维修人员执照基础部分某一专业的某一类别的人员申请增加类别。 5.1.2考试内容
维修人员执照基础部分的笔试内容分为以下13个模块： M3. 电工基础
M4. 模拟电子技术基础 M5. 数字电子技术基础 M6. 维护技术基础
M8. 空气动力学基础及飞行原理 M9. 人为因素
Republic of China fire control law of 2009.05.01 4, Chairman of the national people's Congress Standing Committee 6th People's Republic of China labor law 2008.1.1, Chairman of the national people's Congress Standing Committee, 65th 5 People's Republic of China on road traffic safety law 2011.5.1, Chairman of the national people's Congress made the 47th, 6 People's Republic of China Trade Union law 2001.10.27 7, Chairman of the national people's Congress made the 62nd People's Republic of China emergency response law 2007.11.1, Chairman of the national people's Congress, the 69th 8 Hazardous chemical safety management regulation amended Decree No. 344 2011.12.1 the State Council promulgated by Decree No. 591, 9 People's Republic of China regulations on road transport 2004.07.01 2004.01.13 10 safety production license Ordinance, promulgated by Decree No. 406 of the State Council promulgated by Decree of the State Council, No. 397 11 2007.06.01 production safety accidentreporting, investigation and handling of Ordinance promulgated by Decree No. 493, 12 of the State Council regulations on special equipment safety supervision 2009.05.01 amended Decree No. 373 State Council Decree No. 549, 13 insurance regulations regarding industrial injuries 2011.01.01 amendment, promulgated by Decree No. 586 of the State Council promulgated by Decree No. 375, 14 administration of precursor chemicals Ordinance 2005.11.01 State Council Decree No. 445, 15 workplaces where toxic substances are used to labour protection 2002.05.12 the State Council promulgated by Decree No. 352, 16 women workers ... 4.6 review and revision 4.6.1 production technology section Office organized relevant departments units once a year to review the documentation issued by, not suitable documents be revised in a timely manner. 4.6.2 processes, technology, material changes on or after an accident, and biotech branch and that the workshop should be timely to various regulations and safetyrules be revised to ensure suitability and effectiveness. 4.6.3 revision of the file change approval form should be filled in, indicating the causes and changes, approved by the Deputy in charge of security, General Manager of revision. 4.6.4 a new revised safety regulations and safety rules should be released to the post in a timely manner to ensure rules and safety regulations of each post is the latest file, recover the original document unified void. 5. related records 5.1 list of applicable laws, regulations and standards of the inventory listing number carbon industry laws and regulations legal regulations and other requirements came into force date enacted sector update record 1/standard number People's Republic of China 2, Chairman of the national people's Congress made the 70th production safety law 2002.11.1 People's Republic of China Law of occupational disease prevention 2002.05.01 NPC 3, order of the President of the 60th People's Republic of China fire control law of 2009.05.01 4, Chairman ofthe national people's Congress Standing Committee 6th People's Republic of China labor law 2008.1.1, Chairman of the national people's CongressRepublic of China fire control law of 2009.05.01 4, Chairman of the national people's Congress Standing Committee 6th People's Republic of China labor law 2008.1.1, Chairman of the national people's Congress Standing Committee, 65th 5 People's Republiof China on road traffic safety law 2011.5.1, Chairman of the national people's Congress made the 47th, 6 People's Republic of China Trade Union law 2001.10.27 7, Chairman of the national people's Congress made the 62nd People's Republic of China emergency response law 2007.11.1, Chairman of the national people's Congress, the 69th 8 Hazardous chemical safety management regulation amended Decree No. 344 2011.12.1 the State Council promulgated by Decree No. 591, 9 People's Republic of China regulations on road transport 2004.07.01 2004.01.13 10 safety production license Ordinance, promulgated by Decree No. 406 of the State Council promulgated by Decree of the State Council, No. 397 11 2007.06.01 production safety accident reporting, investigation and handling of Ordinance promulgated by Decree No. 493, 12 of the State Council regulations on special equipment safety supervision 2009.05.01 amended Decree No. 373 State Council Decree No. 549, 13 insurance regulations regarding industrial injuries 2011.01.01 amendment, promulgated by Decree No. 586 of the State Council promulgated by Decree No. 375, 14 administration of precursor chemicals Ordinance 2005.11.01 State Council Decree No. 445, 15 workplaces where toxic substances are used to labour protection 2002.05.12 the State Council promulgated by Decree No. 352, 16 women workers ... 4.6 review and revision 4.6.1 production technology section Office organized relevant departments units once a year to review the documentation issued by, not suitable documents be revised in a timely manner. 4.6.2 processes, technology, material changes on or after an accident, and biotech branch and that the workshop should be timely to various regulations and safety rules be revised to ensure suitability and effectiveness. 4.6.3 revision of the file change approval form should be filled in, indicating the causes and changes, approved by the Deputy in charge of security, General Manager of revision. 4.6.4 a new revised safety regulations and safety rules should be released to the post in a timely manner to ensure rules and safety regulations of each post is the latest file, recover the original document unified void. 5. related records 5.1 list of applicable laws, regulations and standards of the inventory listing number carbon industry laws and regulations legal regulations and other requirements came into force date enacted sector update record 1/standard number People's Republic of China 2, Chairman of the national people's Congress made the 70th production safety law 2002.11.1 People's Republic of China Law ofoccupational disease prevention 2002.05.01 NPC 3, order of the President of the 60th People's Republic of China fire control law of 2009.05.01 4, Chairman of the national people's Congress Standing Committee 6th People's Republic of China labor law 2008.1.1, Chairman of the national people's Congressheight, deep understanding of \nd education on strengthening education of party members and cadres and building a contingent of cadres with high quality, maintaining and developing the party's advanced nature and purity of the significance of practical thought and action into Central and provincial requirements. First, the \o\nd education, is continuously strengthening the party's ideological and political construction of major deployment. Attach importance to party ideology, is the specialty of our party, since the party's 18 distinct characteristic of strictly administering the party. XI General Secretary pointed out that our party must improve itself, the first task is to strengthen ideological and political construction, the key is the educational management of party members and cadres. At present, the ideas and values have become increasingly active, social trends are largely stirring blend, cultural exchanges and the complexity of the situation, drove, some party members ' ideological and political problems, there is an urgent need to strengthen party ideology: clearing the fog, was centering. Like, some belief confused, \confidence\nsufficient, praised Western value concept; some spirit empty, not letter Marty letter ghosts; some political discipline relaxation, in party not statements party, and not love party, and not nursing party, and not for party, even denied party of some most basic of principles and position; some organization discipline lax, not by provides participate in party of organised, not completed party distribution of task, not by party of organization principles do; some egoism serious, and people race Lee, and self-dealing; some depressed, and escaperesponsibility, Omission, not as good as some moral decline, violating public morality, professional ethics and family virtues, not personal morality; some honesty and self-discipline awareness is not strong, with no fear, lawlessness, abuse, and corruption among political, and so on. These problems, after all, and ignore the Constitution Party rules, ignore advanced theory, and lack of sense of consciousness, consciousness, pioneer of the party has a lot to do with it. Thought, belief and faith, stick to the spiritual pursuit of Communists, has always been the Communists to settle down at all. \education, is to enable each party to party rules etched in the heart of the party Constitution, and speech into a series of powerful weapon, clearing the barriers and gain the fetters of the mind, improve the ideological and political quality, worthy of the glorious title of the party members. Second, the \o\and education, comprehensively strengthen the construction of grass-roots partyorganizations and party members is an important ... Awake, our party members and party organizations, especially at the grassroots level, some of the party member's quality is not high, lax discipline and some primary party organizations are weak and lax, wiped out some grassroots cadres as, chaos as, thick friends, eating, and so on. These problems are likeregulations and other requirements. 4.4 laws, regulations and other requirements of issuance, implementation, inspection and conformity assessment. 4.4.1 production technology section promptly of any applicable laws, regulations and other requirements, the important contents in the excerpts, and distributed to the relevant departments and units. 4.4.2 units should be organized to study law, regulations, standards and other requirements and run in strict compliance with safety standardization, unit training records in various departments safety meeting records, team records in the team event records. 4.4.3 biotech section once a year to carry out safety laws and regulations to supervise and inspect, for failure to comply with laws, regulations and other requirements to organize relevant departments to analyze the causes of the phenomenon, for rectification. Production technology section is responsible for establishing laws, regulations and other requirements conformity assessment records. 4.5 rules and safety procedures 4.5.1 bio section is responsible for the preparation of the company's safety rules and regulations, and distributed to all staff of the Organization of the workshop and strictly enforced. 4.5.2 the workshops should be developed based on the characteristics suitable for the unit's safety regulations or group safety regulations implementing regulations, issued to the workshop and team, should be strictly enforced at all levels. 4.5.3 workshop should be based on the processes, technologies, equipment characteristic products and raw materials, auxiliary materials, preparation of the risk position for safe operation, sent to the workshop and team, personnel should operate in accordance with the safety rules. 4.6 review and revision 4.6.1 production technology section Office organized relevant departments units once a year to review the documentation issued by, not suitable documents be revised in a timely manner. 4.6.2 processes, technology, material changes on or after an accident, and biotech branch and that the workshop should be timely to various regulations and safety rules be revised to ensure suitability and effectiveness. 4.6.3 revision of the file change approval form should be filled in, indicating the causes and changes, approved by the Deputy in charge of security, General Manager of revision. 4.6.4 a new revised safety regulations and safety rules should be released to the post in a timely manner to ensure rules and safety regulations of each post is the latest file, recover the original document unified void. 5. related records 5.1 list of applicable laws, regulations and standards of the inventory listing number carbon industry laws and regulations legal regulations and other requirements came into force date enacted sector update record 1/standard number People's Republic of China 2, Chairman of the national people's Congress made the 70th production safety law 2002.11.1 People's Republic of China Law of occupational disease prevention 2002.05.01 NPC 3, order of the President of the 60th People'sregulations and other requirements. 4.4 laws, regulations and other requirements of issuance, implementation, inspection and conformity assessment. 4.4.1 production technology section promptly of any applicable laws, regulations and other requirements, the important contents in the excerpts, and distributed to the relevant departments and units. 4.4.2 units should be organized to study law, regulations, standards and other requirements and run in strict compliance with safety standardization, unit training records in various departments safety meeting records, team records in the team event records. 4.4.3 biotech section once a year to carry out safety laws and regulations to supervise and inspect, for failure to comply with laws, regulations and other requirements to organize relevant departments to analyze the causes of the phenomenon, for rectificaton. Production technology section is responsible for establishing laws, regulations and other requirements conformity assessment records. 4.5 rules and safety procedures 4.5.1 bio section is responsible for the preparation of the company's safety rules and regulations, and distributed to all staff of the Organization of the workshop and strictly enforced. 4.5.2 the workshops should be developed based on the characteristics suitable for the unit's safety regulations or group safety regulations implementing regulations, issued to the workshop and team, should be strictly enforced at all levels. 4.5.3 workshop should be based on the processes, technologies, equipment characteristic products and raw materials, auxiliary materials, preparation of the risk position for safe operation, sent to the workshop and team, personnel should operate in accordance with the safety rules. 4.6 review and revision 4.6.1 production technology section Office organized relevant departments units once a year to review the documentation issued by, not suitable documents be revised in a timely manner. 4.6.2 processes, technology, material changes on or after an accident, and biotech branch and that the workshop should be timely to various regulations and safety rules be revised to ensure suitability and effectiveness. 4.6.3 revision of the file change approval form should be filled in, indicating the causes and changes, approved by the Deputy in charge of security, General Manager of revision. 4.6.4 a new revised safety regulations and safety rules should be released to the post in a timely manner to ensure rules and safety regulations of each post is the latest file, recover the original document unified void. 5. related records 5.1 list of applicable laws, regulations and standards of the inventory listing number carbon industry laws and regulations legal regulations and other requirements came into force date enacted sector update record 1/standard number People's Republic of China 2, Chairman of the national people's Congress made the 70th production safety law 2002.11.1 People's Republic of China Law ofoccupational disease prevention 2002.05.01 NPC 3, order of the President of the 60th People'sThis Conference is by municipal Standing Committee research decided held of, main task is in-depth learning implement XI General Secretary on \n a do\ducation of important indicates spirit and provincial Secretary XXX important speech spirit, according to central deployment and provincial requirements, on I city \ng education work for arrangements deployment, education guide General members further firm ideal faith, and keep on partyoyalty, and set breeze upright, and courage to play as, for in province first full built well-off social, and Building higher levels of ecological vitality city provide a strong organizational guarantee of happiness. All party members in the \on Party rules, series of speeches, be qualified party members\ducation, Party Central Committee to deepen the inner-party education, advancing the comprehensive yet another important practice in strictly administering the party, is to promote the inner-party education from \nded, from the concentration of important measures to extend education to regular education, is leading the task of party building this year. This year, the XI General Secretary on many occasions \ducation issued instructions, profoundly illustrates the significance of education, brilliantly describes the overall objectives, basic requirements and main tasks of education, made clear that the main responsibility of the head of the party organization at all levels and shall carry out, point in the right direction for the us to carry out study and education, provide the fundamental follow. On April 6, Liu Yunshan, Comrade Zhao Leji in Central %um on educational work, a careful deployment of this work, put forward a clear requirement. On April 13, the Party Secretary, Xie Fuzhan, Director of the provincial people's Congress, the province's \study educational Conference, made specific arrangements to carry out study and education in the province. We want to seriously study led And further implementation. Party according to the spirit of the Central and provincial requirements, based on actual city, research has developed a \o\onal programmes and study contents specific programmes, we want to pay special attention to follow-up. Now, I make a few remarks. First, deepening understanding, enhancing grasp \onal responsibility since the party's 18, Comrade XI Jinping as General Secretary of the CPC Central Committee made a series of major deployment around the party's construction, making a series of punch, construction of a new political styles and the aspirations of the Party greatly condensed. \nd education, reflects the interlocking, step by step, further promote the comprehensive strictly administering the party's firm determination and political will, to push forward the \e\strategy is of great significance. We should be supported by political and overallM10. 航空法规和维修出版物
M11. 涡轮发动机飞机的结构与系统 M12. 直升机飞行原理、结构与系统 M13. 活塞发动机飞机的结构与系统 M14. 燃气涡轮发动机 M15. 活塞式发动机 M16. 螺旋桨
5.1.3考试要求及题目分配
维修人员执照基础部分笔试采用模块考试方法进行。
模块考试申请人应当通过其申请专业规定的每一模块内容的考试。如：维修人员执照基础部分航空电子专业的申请人应当通过 M3、 M4、 M5、 M6、M8、M9、M10、M11、M14这9个模块的考试。这些模块的考试都通过了才表示其通过了维修人员执照基础部分航空电子专业的笔试。
考试时间按照每道题72秒作答计算，每模块考试成绩按照成绩的70%（含）以上为合格。申请人可以选择一次申请一个或多个模块内容的考试，但每场考试的最长时间不超过3小时。
各专业的模块分配以及每一模块的笔试试题数量分配情况如《维修人员执照基础部分笔试各专业试题数量分配表》所示。
Republic of China fire control law of 2009.05.01 4, Chairman of the national people's Congress Standing Committee 6th People's Republic of China labor law 2008.1.1, Chairman of the national people's Congress Standing Committee, 65th 5 People's Republic of China on road traffic safety law 2011.5.1, Chairman of the national people's Congress made the 47th, 6 People's Republic of China Trade Union law 2001.10.27 7, Chairman of the national people's Congress made the 62nd People's Republic of China emergency response law 2007.11.1, Chairman of the national people's Congress, the 69th 8 Hazardous chemical safety management regulation amended Decree No. 344 2011.12.1 the State Council promulgated by Decree No. 591, 9 People's Republic of China regulations on road transport 2004.07.01 2004.01.13 10 safety production license Ordinance, promulgated by Decree No. 406 of the State Council promulgated by Decree of the State Council, No. 397 11 2007.06.01 production safety accidentreporting, investigation and handling of Ordinance promulgated by Decree No. 493, 12 of the State Council regulations on special equipment safety supervision 2009.05.01 amended Decree No. 373 State Council Decree No. 549, 13 insurance regulations regarding industrial injuries 2011.01.01 amendment, promulgated by Decree No. 586 of the State Council promulgated by Decree No. 375, 14 administration of precursor chemicals Ordinance 2005.11.01 State Council Decree No. 445, 15 workplaces where toxic substances are used to labour protection 2002.05.12 the State Council promulgated by Decree No. 352, 16 women workers ... 4.6 review and revision 4.6.1 production technology section Office organized relevant departments units once a year to review the documentation issued by, not suitable documents be revised in a timely manner. 4.6.2 processes, technology, material changes on or after an accident, and biotech branch and that the workshop should be timely to various regulations and safetyrules be revised to ensure suitability and effectiveness. 4.6.3 revision of the file change approval form should be filled in, indicating the causes and changes, approved by the Deputy in charge of security, General Manager of revision. 4.6.4 a new revised safety regulations and safety rules should be released to the post in a timely manner to ensure rules and safety regulations of each post is the latest file, recover the original document unified void. 5. related records 5.1 list of applicable laws, regulations and standards of the inventory listing number carbon industry laws and regulations legal regulations and other requirements came into force date enacted sector update record 1/standard number People's Republic of China 2, Chairman of the national people's Congress made the 70th production safety law 2002.11.1 People's Republic of China Law of occupational disease prevention 2002.05.01 NPC 3, order of the President of the 60th People's Republic of China fire control law of 2009.05.01 4, Chairman ofthe national people's Congress Standing Committee 6th People's Republic of China labor law 2008.1.1, Chairman of the national people's CongressRepublic of China fire control law of 2009.05.01 4, Chairman of the national people's Congress Standing Committee 6th People's Republic of China labor law 2008.1.1, Chairman of the national people's Congress Standing Committee, 65th 5 People's Republiof China on road traffic safety law 2011.5.1, Chairman of the national people's Congress made the 47th, 6 People's Republic of China Trade Union law 2001.10.27 7, Chairman of the national people's Congress made the 62nd People's Republic of China emergency response law 2007.11.1, Chairman of the national people's Congress, the 69th 8 Hazardous chemical safety management regulation amended Decree No. 344 2011.12.1 the State Council promulgated by Decree No. 591, 9 People's Republic of China regulations on road transport 2004.07.01 2004.01.13 10 safety production license Ordinance, promulgated by Decree No. 406 of the State Council promulgated by Decree of the State Council, No. 397 11 2007.06.01 production safety accident reporting, investigation and handling of Ordinance promulgated by Decree No. 493, 12 of the State Council regulations on special equipment safety supervision 2009.05.01 amended Decree No. 373 State Council Decree No. 549, 13 insurance regulations regarding industrial injuries 2011.01.01 amendment, promulgated by Decree No. 586 of the State Council promulgated by Decree No. 375, 14 administration of precursor chemicals Ordinance 2005.11.01 State Council Decree No. 445, 15 workplaces where toxic substances are used to labour protection 2002.05.12 the State Council promulgated by Decree No. 352, 16 women workers ... 4.6 review and revision 4.6.1 production technology section Office organized relevant departments units once a year to review the documentation issued by, not suitable documents be revised in a timely manner. 4.6.2 processes, technology, material changes on or after an accident, and biotech branch and that the workshop should be timely to various regulations and safety rules be revised to ensure suitability and effectiveness. 4.6.3 revision of the file change approval form should be filled in, indicating the causes and changes, approved by the Deputy in charge of security, General Manager of revision. 4.6.4 a new revised safety regulations and safety rules should be released to the post in a timely manner to ensure rules and safety regulations of each post is the latest file, recover the original document unified void. 5. related records 5.1 list of applicable laws, regulations and standards of the inventory listing number carbon industry laws and regulations legal regulations and other requirements came into force date enacted sector update record 1/standard number People's Republic of China 2, Chairman of the national people's Congress made the 70th production safety law 2002.11.1 People's Republic of China Law ofoccupational disease prevention 2002.05.01 NPC 3, order of the President of the 60th People's Republic of China fire control law of 2009.05.01 4, Chairman of the national people's Congress Standing Committee 6th People's Republic of China labor law 2008.1.1, Chairman of the national people's Congressheight, deep understanding of \nd education on strengthening education of party members and cadres and building a contingent of cadres with high quality, maintaining and developing the party's advanced nature and purity of the significance of practical thought and action into Central and provincial requirements. First, the \o\nd education, is continuously strengthening the party's ideological and political construction of major deployment. Attach importance to party ideology, is the specialty of our party, since the party's 18 distinct characteristic of strictly administering the party. XI General Secretary pointed out that our party must improve itself, the first task is to strengthen ideological and political construction, the key is the educational management of party members and cadres. At present, the ideas and values have become increasingly active, social trends are largely stirring blend, cultural exchanges and the complexity of the situation, drove, some party members ' ideological and political problems, there is an urgent need to strengthen party ideology: clearing the fog, was centering. Like, some belief confused, \confidence\nsufficient, praised Western value concept; some spirit empty, not letter Marty letter ghosts; some political discipline relaxation, in party not statements party, and not love party, and not nursing party, and not for party, even denied party of some most basic of principles and position; some organization discipline lax, not by provides participate in party of organised, not completed party distribution of task, not by party of organization principles do; some egoism serious, and people race Lee, and self-dealing; some depressed, and escaperesponsibility, Omission, not as good as some moral decline, violating public morality, professional ethics and family virtues, not personal morality; some honesty and self-discipline awareness is not strong, with no fear, lawlessness, abuse, and corruption among political, and so on. These problems, after all, and ignore the Constitution Party rules, ignore advanced theory, and lack of sense of consciousness, consciousness, pioneer of the party has a lot to do with it. Thought, belief and faith, stick to the spiritual pursuit of Communists, has always been the Communists to settle down at all. \education, is to enable each party to party rules etched in the heart of the party Constitution, and speech into a series of powerful weapon, clearing the barriers and gain the fetters of the mind, improve the ideological and political quality, worthy of the glorious title of the party members. Second, the \o\and education, comprehensively strengthen the construction of grass-roots partyorganizations and party members is an important ... Awake, our party members and party organizations, especially at the grassroots level, some of the party member's quality is not high, lax discipline and some primary party organizations are weak and lax, wiped out some grassroots cadres as, chaos as, thick friends, eating, and so on. These problems are likeregulations and other requirements. 4.4 laws, regulations and other requirements of issuance, implementation, inspection and conformity assessment. 4.4.1 production technology section promptly of any applicable laws, regulations and other requirements, the important contents in the excerpts, and distributed to the relevant departments and units. 4.4.2 units should be organized to study law, regulations, standards and other requirements and run in strict compliance with safety standardization, unit training records in various departments safety meeting records, team records in the team event records. 4.4.3 biotech section once a year to carry out safety laws and regulations to supervise and inspect, for failure to comply with laws, regulations and other requirements to organize relevant departments to analyze the causes of the phenomenon, for rectification. Production technology section is responsible for establishing laws, regulations and other requirements conformity assessment records. 4.5 rules and safety procedures 4.5.1 bio section is responsible for the preparation of the company's safety rules and regulations, and distributed to all staff of the Organization of the workshop and strictly enforced. 4.5.2 the workshops should be developed based on the characteristics suitable for the unit's safety regulations or group safety regulations implementing regulations, issued to the workshop and team, should be strictly enforced at all levels. 4.5.3 workshop should be based on the processes, technologies, equipment characteristic products and raw materials, auxiliary materials, preparation of the risk position for safe operation, sent to the workshop and team, personnel should operate in accordance with the safety rules. 4.6 review and revision 4.6.1 production technology section Office organized relevant departments units once a year to review the documentation issued by, not suitable documents be revised in a timely manner. 4.6.2 processes, technology, material changes on or after an accident, and biotech branch and that the workshop should be timely to various regulations and safety rules be revised to ensure suitability and effectiveness. 4.6.3 revision of the file change approval form should be filled in, indicating the causes and changes, approved by the Deputy in charge of security, General Manager of revision. 4.6.4 a new revised safety regulations and safety rules should be released to the post in a timely manner to ensure rules and safety regulations of each post is the latest file, recover the original document unified void. 5. related records 5.1 list of applicable laws, regulations and standards of the inventory listing number carbon industry laws and regulations legal regulations and other requirements came into force date enacted sector update record 1/standard number People's Republic of China 2, Chairman of the national people's Congress made the 70th production safety law 2002.11.1 People's Republic of China Law of occupational disease prevention 2002.05.01 NPC 3, order of the President of the 60th People'sregulations and other requirements. 4.4 laws, regulations and other requirements of issuance, implementation, inspection and conformity assessment. 4.4.1 production technology section promptly of any applicable laws, regulations and other requirements, the important contents in the excerpts, and distributed to the relevant departments and units. 4.4.2 units should be organized to study law, regulations, standards and other requirements and run in strict compliance with safety standardization, unit training records in various departments safety meeting records, team records in the team event records. 4.4.3 biotech section once a year to carry out safety laws and regulations to supervise and inspect, for failure to comply with laws, regulations and other requirements to organize relevant departments to analyze the causes of the phenomenon, for rectification. Production technology section is responsible for establishing laws, regulations and other requirements conformity assessment records. 4.5 rules and safety procedures 4.5.1 bio section is responsible for the preparation of the company's safety rules and regulations, and distributed to all staff of the Organization of the workshop and strictly enforced. 4.5.2 the workshops should be developed based on the characteristics suitable for the unit's safety regulations or group safety regulations implementing regulations, issued to the workshop and team, should be strictly enforced at all levels. 4.5.3 workshop should be based on the processes, technologies, equipment characteristic products and raw materials, auxiliary materials, preparation of the risk position for safe operation, sent to he workshop and team, personnel should operate in accordance with the safety rules. 4.6 review and revision 4.6.1 production technology section Office organized relevant departments units once a year to review the documentation issued by, not suitable documents be revised in a timely manner. 4.6.2 processes, technology, material changes on or after an accident, and biotech branch and that the workshop should be timely to various regulations and safety rules be revised to ensure suitability and effectiveness. 4.6.3 revision of the file change approval form should be filled in, indicating the causes and changes, approved by the Deputy in charge of security, General Manager of revision. 4.6.4 a new revised safety regulations and safety rules should be released to the post in a timely manner to ensure rules and safety regulations of each post is the latest file, recover the original document unified void. 5. related records 5.1 list of applicable laws, regulations and standards of the inventory listing number carbon industry laws and regulations legal regulations and other requirements came into force date enacted sector update record 1/standard number People's Republic of China 2, Chairman of the national people's Congress made the 70th production safety law 2002.11.1 People's Republic of China Law of occupational disease prevention 2002.05.01 NPC 3, order of the President of the 60th People'sThis Conference is by municipal Standing Committee research decided held of, main task is in-depth learning implement XI General Secretary on \do\ning education of important indicates spirit and provincial Secretary XXX important speech spirit, according to central deployment and provincial requirements, on I city \do\ning education work for arrangements deployment, education guide General members further firm ideal faith, and keep on party loyalty, and set breeze upright, and courage to play as, for in province first full built well-off social, and Building higher levels of ecological vitality city provide a strong organizational guarantee of happiness. All party members in the \on Party rules, series of speeches, be qualified party members\on, Party Central Committee to deepen the inner-party education, advancing the comprehensive yet another important practice in strictly administering the party, is to promote the inner-party education from \st number of party members expanded, from the concentration of important measures to extend education to regular education, is leading the task of party building this year. This year, the XI General Secretary on many occasions %udy and education issued instructions, profoundly illustrates the significance of education, brilliantly describes the overall objectives, basic requirements and main tasks of education, made clear that the main responsibility of the head of the party organization at all levels and shall carry out, point in the right direction for the us to carry out study and education, provide the fundamental follow. On April 6, Liu Yunshan, Comrade Zhao Leji in Central \careful deployment of this work, put forward a clear requirement. On April 13, the Party Secretary, Xie Fuzhan, Director of the provincial people's Congress, the province's \educational Conference, made specific arrangements to carry out study and education in the province. We want to seriously study led And further implementation. Party according to the spirit of the Central and provincial requirements, based on actual city, research has developed a \ogrammes and study contents specific programmes, we want to pay special attention to follow-up. Now, I make a few remarks. First, deepening understanding, enhancing grasp \onal responsibility since the party's 18, Comrade XI Jinping as General Secretary of the CPC Central Committee made a series of major deployment around the party's construction, making a series of punch, construction of a new political styles and the aspirations of the Party greatly condensed. \on, reflects the interlocking, step by step, further promote the comprehensive strictly administering the party's firm determination and political will, to push forward the \comprehensive\of great significance. We should be supported by political and overall维修人员执照基础部分笔试各专业试题数量分配表 模块 M3 M4 M5 M6 M8 M9 M10 M11 M12 M13 M14 M15 M16 内容 电工基础 模拟电子技术基础 数字电子技术基础 维护技术基础 空气动力学基础及飞行原理 人为因素 航空法规和维修出版物 涡轮发动机飞机的结构与系统 直升机的飞行原理,结构与系统 活塞发动机飞机的结构与系统 燃气涡轮发动机 活塞发动机 螺旋桨 考题总计 82 28 22 74 46 20 28 148 94 20 ME-TA 考题量 考试时间 99 34 27 89 56 24 34 178 113 24 ME-PA 考题量 82 28 22 74 46 20 28 考试时间 99 34 27 89 56 24 34 ME-TH 考题量 82 28 22 74 46 20 28 考试时间 99 34 27 89 56 24 34 ME-PH 考题量 82 28 22 74 46 20 28 考试时间 99 34 27 89 56 24 34 142 72 考题量 82 80 58 50 46 20 28 148 26 AV 考试时间 99 96 70 60 56 24 34 178 32 82 60 20 118 94 118 60 99 72 24 142 113 562 462 512 478 538 注：ME-TA航空机械专业-涡轮式飞机 ME-PA航空机械专业-活塞式飞机 ME-TH航空机械专业-涡轮式直升机 ME-PH航空机械专业-活塞式直升机
AV航空电子专业
Republic of China fire control law of 2009.05.01 4, Chairman of the national people's Congress Standing Committee 6th People's Republic of China labor law 2008.1.1, Chairman of the national people's Congress Standing Committee, 65th 5 People's Republic of China on road traffic safety law 2011.5.1, Chairman of the national people's Congress made the 47th, 6 People's Republic of China Trade Union law 2001.10.27 7, Chairman of the national people's Congress made the 62nd People's Republic of China emergency response law 2007.11.1, Chairman of the national people's Congress, the 69th 8 Hazardous chemical safety management regulation amended Decree No. 344 2011.12.1 the State Council promulgated by Decree No. 591, 9 People's Republic of China regulations on road transport 2004.07.01 2004.01.13 10 safety production license Ordinance, promulgated by Decree No. 406 of the State Council promulgated by Decree of the State Council, No. 397 11 2007.06.01 production safety accident reporting, investigation and handling of Ordinance promulgated by Decree No. 493, 12 of the State Council regulations on special equipment safety supervision 2009.05.01 mended Decree No. 373 State Council Decree No. 549, 13 insurance regulations regarding industrial njuries 2011.01.01 amendment, promulgated by Decree No. 586 of the State Council promulgated by Decree No. 375, 14 administration of precursor chemicals Ordinance 2005.11.01 State Council Decree No. 445, 15 workplaces where toxic substances are used to labour protection 2002.05.12 the State Council promulgated by Decree No. 352, 16 women workers ... 4.6 review and revision 4.6.1 production technology section Office organized relevant departments units once a year to review the documentation issued by, not suitable documents be revised in a timely manner. 4.6.2 processes, technology, material changes on or after an accident, and biotech branch and that the workshop should be timely to various regulations and safety rules be revised to ensure suitability and effectiveness. 4.6.3 revision of the file change approval form should be filled in, indicating the causes and changes, approved by the Deputy in charge of security, General Manager of revision. 4.6.4 a new revised safety regulations and safety rules should be released to the post in a timely manner to ensure rules and safety regulations of each post is the latest file, recover the original document unified void. 5. related records 5.1 list of applicable laws, regulations and standards of the inventory listing number carbon industry laws and regulations legal regulations and other requirements came into force date enacted sector update record 1/standard number People's Republic of China 2, Chairman of the national people's Congress made the 70th production safety law 2002.11.1 People's Republic of China Law of occupational disease prevention 2002.05.01 NPC 3, order of the President of the 60th People's Republic of China fire control law of 2009.05.01 4, Chairman of the national people's Congress Standing Committee 6th People's Republic of China labor law 2008.1.1, Chairman of the national people's CongressRepublic of China fire control law of 2009.05.01 4, Chairman of the national people's Congress Standing Committee 6th People's Republic of China labor law 2008.1.1, Chairman of the nationalpeople's Congress Standing Committee, 65th 5 People's Republic of China on road traffic safety law 2011.5.1, Chairman of the national people's Congress made the 47th, 6 People's Republic of China Trade Union law 2001.10.27 7, Chairman of the national people's Congress made the 62nd People's Republic of China emergency response law 2007.11.1, Chairman of the national people's Congress, the 69th 8 Hazardous chemical safety management regulation amended Decree No. 344 2011.12.1 the State Council promulgated by Decree No. 591, 9 People's Republic of China regulations on road transport 2004.07.01 2004.01.13 10 safety production license Ordinance, promulgated by Decree No. 406 of the State Council promulgated by Decree of the State Council, No. 397 11 2007.06.01 production safety accident reporting, investigation and handling of Ordinance promulgated by Decree No. 493, 12 of the State Council regulations on special equipment safety supervision 2009.05.01 amended Decree No. 373 State Council Decree No. 549, 13 insurance regulations regarding industrial injuries 2011.01.01 amendment, promulgated by Decree No. 586 of the State Council promulgated by Decree No. 375, 14 administration of precursor chemicals Ordinance 2005.11.01 State Council Decree No. 445, 15 workplaces where toxic substances are used to labour protection 2002.05.12 the State Council promulgated by Decree No. 352, 16 women workers ... 4.6 review and revision 4.6.1 production technology section Office organized relevant departments units once a year to review the documentation issued by, not suitable documents be revised in a timely manner. 4.6.2 processes, technology, material changes on or after an accident, and biotech branch and that the workshop should be timely to various regulations and safety rules be revised to ensure suitability and effectiveness. 4.6.3 revision of the file change approval form should be filled in, indicating the causes and changes, approved by the Deputy in charge of security, General Manager of revision. 4.6.4 a new revised safety regulations and safety rules should be released to the post in a timely manner to ensure rules and safety regulations of each post is the latest file, recover the original document unified void. 5. related records 5.1 list of applicable laws, regulations and standards of the inventory listing number carbon industry laws and regulations legal regulations and other requirements came into force date enacted sector update record 1/standard number People's Republic of China 2, Chairman of the national people's Congress made the 70th production safety law 2002.11.1 People's Republic of China Law of occupational disease prevention 2002.05.01 NPC 3, order of the President of the 60th People's Republic of China fire control law of 2009.05.01 4, Chairman of the national people's Congress Standing Committee 6th People's Republic of China labor law 2008.1.1, Chairman of the national people's Congressheight, deep understanding of \ducation on strengthening education of party members and cadres and building a contingent of cadres with high quality, maintaining and developing the party's advanced nature and purity of the significance of practical thought and action into Central and provincial requirements. First, the \continuously strengthening the party's ideological and political construction of major deployment. Attach importance to party ideology, is the specialtyof our party, since the party's 18 distinct characteristic of strictly administering the party. XI General Secretary pointed out that our party must improve itself, the first task is to strengthen ideological and political construction, the key is the educational management of party members and cadres. At present, the ideas and values have become increasingly active, social trends are largely stirring blend, cultural exchanges and the complexity of the situation, drove, some party members ' ideological and political problems, there is an urgent need to strengthen party ideology: clearing the fog, was centering. Like, some belief confused, \confidence\praised Western value concept; some spirit empty, not letter Marty letter ghosts; some political discipline relaxation, in party not statements party, and not love party, and not nursing party, and not for party, even denied party of some most basic of principles and position; some organization discipline lax, not by provides participate in party of organised, not completed party distribution of task, not by party of organization principles do; some egoism serious, and people race Lee, and self-dealing; some depressed, and escape responsibility, Omission, not as good as some moral decline, violating public morality, professional ethics and family virtues, not personal morality; some honesty and self-discipline awareness is not strong, with no fear, lawlessness, abuse, and corruption among political, and so on. These problems, after all, and ignore the Constitution Party rules, ignore advanced theory, and lack of sense of consciousness, consciousness, pioneer of the party has a lot to do with it. Thought, belief and faith, stick to the spiritual pursuit of Communists, has always been the Communists to settle down at all. \ducation, is to enable each party to party rules etched in the heart of the party Constitution, and speech into a series of powerful weapon, clearing the barriers and gain the fetters of the mind, improve the ideological and political quality, worthy of the glorious title of the party members. Second, the \on, comprehensively strengthen the construction of grass-roots party organizations and party members is an important ... Awake, our party members and party organizations, especially at the grassroots level, some of the party member's quality is not high, lax discipline and some primary party organizations are weak and lax, wiped out some grassroots cadres as, chaos as, thick friends, eating, and so on. These problems are like